Table of Contents
Advertisement
Error Messages
An error message will be displayed И the EF-303 is operated
incorrectly, or if it is unable to perform an operation
successfully. Take the appropriate action for the error
message that appears.
Cause: Too many MIDI messages were received all at once,
and the EF-303 was unable to process them.
Action: Reduce the amount of recorded data that is being
sent to the EF-303.
Cause: There is a problem with the MIDI cable connection.
Action: Check to make sure the MIDI cable has not been
disconnected or severed.
E.
за
Cause: Ап exclusive message with an incorrect checksum
value was received.
Action: Correct the checksum value.
Cause: Àn exclusive message with an incorrect format was
received.
Action: Check the transmitted data, and perform the
operation once again. Also make sure that the MIDI cable has
not been disconnected or broken.
Cause: The contents of internal memory may have gotten
corrupted.
Action: Try carrying out a factory reset (p. 16). If this does
not resolve the problem, contact a nearby Roland service
center.
69
Advertisement
Table of Contents
