Table of Contents
Advertisement
values.
Settings that are reset
* System settings
* Patch memory
FACTRY
2
Press the [WRITE] button.
If you decide not to execute the operation, press the [EXIT] button.
to execute, press the [WRITE] button once again. To cancel
without executing, press the [EXIT] button.
SURE
The BPM display area will blink while the Factory Reset is being performed.
When it is completed, the display indicate "END".
TN
ШЕ
iz
FACTRY
END
Turn the power on once again.
16
yon
If the internal memory of
the EF-303 contains
important data, use the
Bulk Dump operation to
save the data on an external
MIDI sequencer or similar
device before you execute
Factory Preset. > Saving
EF-303 settings on an
external sequencer
(BULK DUMP) (p. 50))
vOv
Do not turn off the power
while the BPM display is
blinking. Doing so may
damage the system.
Advertisement
Table of Contents
