Table of Contents
Advertisement
Panel Descriptions
Front Panel
1. [INPUT] LEVEL Knob
This knob adjusts the signal level that is input from the
[INPUT] jack.
> Adjusting the level (p. 15)
2. [OUTPUT] LEVEL Knob
This knob adjusts the level of the signal that is output when
the effect is on.
"> Adjusting the level (p. 15)
3. [PHONES] Knob
This knob adjusts the signal level that is output from the
[HEADPHONE] jack.
-Adjusting the level (p. 15)
4. [EFFECT CUE] Button
Determines what is to be monitored through headphones.
With each press of the button, the LED is either lighted or
extinguished.
LED extinguished: For monitoring the same signal as that
sent from [OUTPUT].
LED lit: For monitoring the effect sound.
> Adjusting the level (p. 15)
STEP MODULATOR.
ж
2
от
5. [GRAB(EFFECT)] Switch
This switch turns the effects on/off.
3 How the Effects Work (p. 35)
6. [SHIFT] Button
When used in conjunction with another button, this changes
Б
the function of the other button.
When you hold down the [SHIFT] button and press another
button, the function enclosed in a rectangle below that button
is activated.
7. [FREQ RANGE] Button
This button selects the frequency range over which the effect
will be applied.
~ How the Effects Work (p. 35)
8. [SYNC TYPE] Button
This button selects the beat (note value) to which the effect
will be synchronized.
How the Effects Work (p. 35)
9. [BPM SYNC] Button
This button lets you synchronize the effect to the beat (note
value) selected by SYNC ТҮРЕ.
= How the Effects Work (p. 35)
Advertisement
Table of Contents
