Sony MDM-X4 Mk2 Operating Instructions Manual page 6

Synchronization with MIDI Equipment (Mk2)
Deleting a tempo map
Use the following operations to delete tempo maps
w'hich arc no longer necessarv. The tempo map
numbers located after the tempo map v\ hieh w as
deletc'cf are brought forw ard automaticalK .
EXAMPLE:
Erasing tempo map o.
1
Press EDIT.
[EDTTI appears in the display.
2
Turn the jog dial so that "Song Tempo" appears in
the display.
The name of the edit function starts blinking in
the display.
3
Press ENTER.
The tempo map setting displa\' appears.
4
Turn the jog dial to displa\' tempo map (D.
05 : 0018J100
Blinking
5
Press ENTER.
The indication for the tempo change position
starts blinking.
Tempo map 1 can only be set to the first bar.
6
Turn the jog dial to the right to display Del.
05: DelJlOO
Blinking
7
Press ENTER.
Deleted ' appears in the displa\ and tempo map
5 is deleted.
The pre\ ious operations can also he used to delete
tempo map 1. How es er, tempo map 1 should only be
deleted after deleting all the other tenrpo maps from 2
up.
MIDI Synchronization Using
EXT
To connect several \1D,\TX4 Mk2 units, or sync this
unit w ith another MIDI component that cannot sync to
an external si'urce, set this unit to external sync mode
and use the MTC (.MIDI Time Code) from an external
source as the s\ nc signal.
Connecting two MDM-X4
L'se a MIDI cable to connect tw o MLDM-Xd Mk2, or an
MDM-X4 and an \1DM-\4 Mk2 (in this case, be sure to
use the MD\1-X4 Mk2 as the sync unit).
MDM-X4 Mk2
(or MDM-X4) MDIVI-X4 Mk2
Setup
1
Set the "Svne" .system setting of the master unit to
MTC.
See "Changing a Setting" (page 18 of the main
Operating Instructivms") and "Sync mode setting
(Sync)" (page 3 of this booklet) for details.
2
Set the "Svne" system setting of the sync unit to
EXT
See "Changing a Setting" (page 18 of the main
"Cdperating Instructions") and "Sync mode setting
(Sync)" (page 3 of this booklet) for details.
3
Set both units to tire beginning of the appropriate
songs.
4
Start pilayback on the master unit.
The sync unit starts playing in sync with the
master unit. The signal is muted and "Chase"
appears in the displav w indovv until
svnehroniMtion stabilises.
(continued)