Sony MDM-X4 Mk2 Operating Instructions Manual page 8

Synchronization with MIDI Equipment (Mk2)
•
Record Exit (Command 07) ; Stops recording on all
tracks.
• MMC Reset (Command OD) : Resets M.MC related
information to tlie state it was in at power on.
• Write (Command 40,41) : Writes or changes data in
the specified information field (for Track Record
Reads' only).
• Locate (Command 44); Locates the specified time
code.
• Group (Command 52) : Checks the device ID list to
.see whether or not the unit belongs to the current
group. If it belongs to the group, that group ID is
used to receix e MMC data.
This unit can store up to 16 IDs.
• Track record ready (Response 4F) .-Turns REC
SELECT on/off.
Example of a MIDI System
Ihe following explains the construction of a
synchronized MIDI system using both MMC and MTC
and a MIDI sound module.
Connections
Computer
MMC MTC °UT(R)
signal signal
MIC
INPUT CH-5
INPUT CH-6
Features available from this type of system
• lou can record live x ocal and guitar tracks (acoustic
sounds) on this unit and then use MIDI sound
control to play them in svnc with other sounds
played hack through a sequencer (etc.).
• lou can use MTC to sx nchronize a sequencer (etc.)
witli this unit.
• ^ ou can use MMC to control this unit from a
sequencer (etc ).