Get Started; Prepare The Remote Control; Find The Correct Viewing Channel; Use The Home Menu - Philips BDP7500SL User Manual

1
Connect the AC power cable to:
• this product.
• the wall socket.
»
This product is ready to be set up for use.

4 Get started

Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.

Prepare the remote control

Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
1
Open the battery compartment.
2
Insert 2 AAA batteries with correct polarity
(+/-) as indicated.
3
Close the battery compartment.
Note
•
If you are not going to use the remote control for a long
time, remove the batteries.
•
Do not use old and new or different types of batteries
in combination.
•
Batteries contain chemical substances, so they should be
disposed of properly.

Find the correct viewing channel

1
Press to turn on this product.
2
Turn on the TV and switch to the correct
video-in channel (refer to the TV user manual
on how to select the correct channel).

Use the Home menu

Play Disc
1
Press .
• To start disc play, select
• To view the USB contents, select
• To access the setup menus, select
[Settings].

Navigate the menu

1
When a menu is displayed, press the buttons
on the remote control to navigate.
Button
OK

Select menu display language

Note
•
If this product is connected to an HDMI CEC compliant
TV, skip this setting. It switches automatically to the
same OSD menu language as per your TV setting (if the
language set on TV is supported by this product).
1
In the Home menu, select [Settings] and press
OK.
2
Select [Preference Setup], then press .
3
Select [Menu Language], then press .
USB Settings
[Play Disc].
[USB].
Action
Move up or down.
Move left or right.
Confirm a selection.
Enter numbers.
EN 11