Enhanced Mode Scsi Configuration - Adaptec AHA-1740A Installation Manual

adaptec
AHA-1740A/1742A/1744
allows the host adapter
to perform other operations on the
SCSI bus while the device is temporarily disconnected.
Enhanced Mode SCSI Configuration
3-8
The view for Enhanced Mode allows more flexible selection and
is shown in Figure 3-6.
System Configuration Detailed View
Fl-Kelp
System Edit View Settings Kelp
Kost Adapter Interface Mode •••••••••• Enhanced Mode
Configuration Settings for SCSI Devices
SCSI Device ID #0 #1 #2 #3 #4 #5 #6 #1
Error
if
Device Not Found no no no no no no no no
BIOS Support Option
HD HD HD HD HD HD HD
no
Send Start Conmand no no no no no no no no
Enable Parity Check yes yes yea yes yea yes yea yea
Initiate Synch Neqotiation yes yes yes yes yea yes yes yes
Enable Disconnection yes yea yes yea yes yea yea yes
Maximum Synch Xfer Rate 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0
(MBs per second)
Ok <ESC>
Slot 4
Figure 8-6. Enhanced Mode SCSI Configuration Screen
The enhanced mode offers a greater selection of SCSI configura-
tion options. Use the Tab or Cursor keys or a mouse to high-
light a particular selection and press Enter to toggle between
no and yes. Each device can have a number of parameters se-
lected individually.
Error if Device Not Found selects whether the operator will
be notified if the BIOS is unable to find the device during the
boot procedure.