Safety Instruction - PrimeVOLT PV 5KTL-D3/G2 User Manual

1 Safety 1 Safety
1.2
Safety Instruction
Installation, maintenance and connection of inverters must be performed by qualified personnel, in
compliance with local electrical standards, wiring rules and requirements of local power authorities
and/or companies (for example: AS 4777 and AS/NZS 3000 in Australia).
To avoid electric shock, DC input and AC output of the inverter must be terminated at least 10 minutes
before performing any installation or maintenance.
The temperature of some parts of the inverter may exceed 60℃ during operation. Do not touch the
inverter during operation to avoid being burnt.
Ensure children are kept away from inverters.
Take appropriate measures to avoid electric shock.
Don't open the front cover of the inverter. Apart from performing work at the wiring terminal,
touching or changing components without authorization may cause injury to people, damage to
inverters and annulment of the warranty.
Ensure the output voltage of the proposed PV array is lower than the maximum rated input voltage of
the inverter; otherwise the inverter may be damaged and the warranty annulled.
When exposed to sunlight, the PV array generates dangerous high DC voltage. Please operate according
to our instructions, or it will result in danger to life.
Prohibit inserting or pulling the AC and DC terminals when the inverter is running.
02