Table of Contents
Advertisement
10. IMPORTANT: To avoid damaging the Pulse
Crossbar Bottom (87), do not use power
tools and do not overtighten the #10 x 3/4"
Screws (6).
Attach the Pulse Crossbar Bottom (87) to the
Handrails (80, 81) with four #10 x 3/4" Screws
(6) and four 1/4" Star Washers (10); start all
four Screws, and then tighten them.
11. Identify the Right Handrail Cover (79). Set the
Right Handrail Cover on the Right Handrail (81).
Slide the Right Handrail Cover forward until it
rests against the console assembly (F).
Next, identify the Right Bottom Handrail Cover
(83) and place it on the bottom of the Right
Handrail (81). Start four #8 x 3/4" Screws (4) into
the bottom of the Right Bottom Handrail Cover;
start all four Screws, and then tighten them.
Attach the Left Handrail Cover (78) and the
Left Bottom Handrail Cover (82) in the same
way.
10
6
10
87
80
11
78
82
4
4
13
6
10
81
F
79
81
83
4
4
Advertisement
Table of Contents
