Table of Contents
Advertisement
Quick Links
proform.com
Model No. PFTL79720.0
Serial No.
Write the serial number in the space
above for reference.
Serial
Number
Decal
ACTIVATE YOUR
WARRANTY
To register your product and
activate your warranty today,
go to my.proform.com.
CUSTOMER CARE
For service at any time, go to
proformservice.com.
Or call 1-888-533-1333
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–12 p.m. MT
Please do not contact the store.
CAUTION
Read all precautions and
instructions in this manual before
using this equipment. Keep this
manual for future reference.
USER'S MANUAL
Advertisement
Table of Contents
Related Manuals for ICON Health & Fitness PFTL79720.0
Summary of Contents for ICON Health & Fitness PFTL79720.0
- Page 1 Model No. PFTL79720.0 USER’S MANUAL Serial No. Write the serial number in the space above for reference. Serial Number Decal ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to my.proform.com. CUSTOMER CARE For service at any time, go to proformservice.com.
-
Page 2: Table Of Contents
TABLE OF CONTENTS WARNING DECAL PLACEMENT ............. . . 2 IMPORTANT PRECAUTIONS . -
Page 3: Important Precautions
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no responsibility for personal injury or property damage sus- tained by or through the use of this product. - Page 4 19. Always stand on the foot rails when starting 25. When folding or moving the treadmill, make or stopping the walking belt. Always hold the sure that the storage latch is holding the handrails while using the treadmill. frame securely in the storage position. Do not operate the treadmill while it is folded.
- Page 5 STANDARD SERVICE PLANS...
-
Page 6: Before You Begin
BEFORE YOU BEGIN Thank you for selecting the new PROFORM ® reading this manual, please see the front cover of this CARBON T7 treadmill. The CARBON T7 treadmill manual. To help us assist you, note the product model provides an impressive selection of features designed number and serial number before contacting us. -
Page 7: Part Identification Chart
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly. -
Page 8: Assembly
ASSEMBLY • To hire a service technician to assemble this • Left parts are marked “L” or “Left” and right parts product in your home, call 1-800-445-2480. are marked “R” or “Right.” • Assembly requires two persons. • To identify small parts, see page 7. •... - Page 9 2. Make sure that the power cord is unplugged. Remove the tie securing the Upright Wire (88) to the front of the Base (97). Next, identify the Right Upright (86). Have a second person hold the Right Upright near the Base (97).
- Page 10 4. Hold the Right Upright (86) against the Base (97). Make sure not to pinch the Upright Wire (88). Insert two 3/8" x 2 3/8" Screws (3) with two 3/8" Star Washers (11) into the top of bracket on the Right Upright (86). Partially tighten the two Screws into the Base (97);...
- Page 11 6. Identify the Left and Right Handrails (80, 81). Attach the Right Handrail (81) to the Right Upright (86) with two 5/16" x 2 1/4" Screws (7) and two 5/16" Star Washers (12) in the location shown; start both Screws, and then tighten them.
- Page 12 8. With the help of a second person, hold the con- sole assembly (F) near the Right Upright (86). Next, insert the Upright Wire (88) through the indicated looped tie (G). Connect the Upright Wire (88) to the wire (H) from the console assembly (F).
- Page 13 10. IMPORTANT: To avoid damaging the Pulse Crossbar Bottom (87), do not use power tools and do not overtighten the #10 x 3/4" Screws (6). Attach the Pulse Crossbar Bottom (87) to the Handrails (80, 81) with four #10 x 3/4" Screws (6) and four 1/4"...
- Page 14 12. Orient the Latch Assembly (84) as shown. Attach the Latch Assembly to the Left Upright (85) with two 1/4" x 4 1/2" Screws (8) and two 1/4" Star Washers (10) ; start both Screws, and then tighten them. 13. Firmly tighten the four 3/8" x 2 3/8" Screws (3), the two 3/8"...
-
Page 15: How To Use The Treadmill
HOW TO USE THE TREADMILL HOW TO CONNECT THE POWER CORD more amps. To avoid overloading the circuit, do not plug other electrical devices, except for low- Use a Surge Suppressor power devices such as cell phone chargers, into the surge suppressor or into an outlet on the same Your treadmill, like other electronic equipment, can be circuit. - Page 16 CONSOLE DIAGRAM FEATURES OF THE CONSOLE or a compatible Bluetooth ® chest strap monitor. See page 30 for information about purchasing an The advanced treadmill console offers a selection of optional chest heart rate monitor. features designed to make your workouts more effec- tive and enjoyable.
- Page 17 HOW TO TURN ON THE POWER HOW TO USE THE TOUCH SCREEN IMPORTANT: If the treadmill has been exposed to The console features a tablet with a full-color touch cold temperatures, allow it to warm to room tem- screen. The following information will help you become perature before you turn on the power.
- Page 18 HOW TO SET UP THE CONSOLE 5. Check for firmware updates. Before using the treadmill for the first time, set up the First, touch your name on the screen and touch console. the Settings button. Next, select the maintenance section. Then, touch the Update button to check 1.
- Page 19 HOW TO USE THE MANUAL MODE 4. Change the incline of the treadmill as desired. 1. Insert the key into the console. To change the incline of the treadmill, press the Incline increase and decrease buttons or one of the See HOW TO TURN ON THE POWER on numbered incline buttons.
- Page 20 • Your pace To measure your heart rate, stand on the foot rails and hold the contacts with your palms for • The speed of the walking belt approximately ten seconds; avoid moving your hands. When your pulse is detected, your heart •...
- Page 21 HOW TO USE A MAP WORKOUT 5. Monitor your progress with the display modes. Note: To use a map workout, the console must be con- See step 5 on page 19. nected to a wireless network (see HOW TO USE THE WIRELESS NETWORK MODE on page 24).
- Page 22 If you make a mistake, press the Undo button on HOW TO USE A DISTANCE OR TIME WORKOUT the left side of the screen. Note: To use a distance or time workout, the console The screen will display the elevation and distance must be connected to a wireless network (see HOW statistics for your workout.
- Page 23 5. Select a distance or time workout that you have HOW TO CHANGE CONSOLE SETTINGS previously added to your schedule on iFit.com. IMPORTANT: Some of the settings and features Touch the calendar icon to download a distance or described may not be enabled. Occasionally, a time workout from your schedule.
- Page 24 3. Customize the unit of measurement and other IMPORTANT: Keep pets, feet, and other objects settings. away from the treadmill while the incline sys- tem is calibrating. In an emergency, pull the key To customize the unit of measurement, the time from the console to stop the incline calibration.
- Page 25 An information box will ask if you want to connect HOW TO USE THE SOUND SYSTEM to the wireless network. Touch the Connect button to connect to the network or touch the Cancel but- To play music or audio books through the console ton to return to the list of networks.
-
Page 26: Fcc Information
THE OPTIONAL CHEST HEART RATE MONITOR THE OPTIONAL TABLET HOLDER Whether your The optional tablet goal is to holder (E) will hold burn fat or to your tablet securely strengthen your in place and enable cardiovascular you to use your tablet system, the key while you exercise. -
Page 27: How To Fold And Move The Treadmill
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the incline Before moving the treadmill, fold it as described at to zero before you fold the treadmill. Then, remove the left. -
Page 28: Maintenance And Troubleshooting
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE c. Check the power switch located on the treadmill frame near the power cord. If the switch protrudes Regular maintenance is important for optimal per- as shown (A), the switch has tripped. To reset the formance and to reduce wear. Inspect and properly power switch, wait for five minutes and then press tighten all parts each time the treadmill is used. - Page 29 SYMPTOM: The walking belt slows when walked on SYMPTOM: The walking belt is off-center or slips when walked on a. Use only a surge suppressor that meets all of the specifi cations described on page 15. a. If the walking belt is off-center, fi rst remove the key and UNPLUG THE POWER CORD.
- Page 30 SYMPTOM: The displays of the console do not SYMPTOM: The treadmill will not connect to the function properly wireless network a. If the console does not boot up properly, or a. Make sure that the wireless settings on the console if the console freezes and does not respond, are correct (see page 24).
-
Page 31: Exercise Guidelines
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy. - Page 32 SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch —never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
- Page 33 NOTES...
-
Page 34: Part List
PART LIST Model No. PFTL79720.0 R0819A Key No. Qty. Description Key No. Qty. Description 3/8" x 1 1/4" Screw Rubber Cushion 3/8" x 1 3/4" Screw 3/8" Pin 3/8" x 2 3/8" Screw Drive Roller/Pulley #8 x 3/4" Screw Controller Clamp #8 x 1/2"... - Page 35 Key No. Qty. Description Key No. Qty. Description Console Frame – User’s Manual Console Ground Wire Note: Specifications are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual. *These parts are not illustrated.
-
Page 36: Exploded Drawing
EXPLODED DRAWING A Model No. PFTL79720.0 R0819A... - Page 37 EXPLODED DRAWING B Model No. PFTL79720.0 R0819A...
- Page 38 EXPLODED DRAWING C Model No. PFTL79720.0 R0819A 2 11 11 1...
- Page 39 EXPLODED DRAWING D Model No. PFTL79720.0 R0819A...
-
Page 40: Ordering Replacement Parts
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...