Charging The High-Voltage Battery - SMART EQ forfour Owner's Manual

Charging the high-voltage battery

76
The two driver assist systems require the
following:
favourable weather and good visibility
R
good road and traffic conditions
R
The cruise control and limiter systems do not
brake automatically.
reduce the vehicle speed by applying the
R
brakes
Speed regulation is cancelled when the fol-
lowing occur:
braking (including the parking brake)
R
®
ESP intervention
R
On downhill gradients or when accelerating
briefly, cruise control may interrupt speed
regulation. Afterwards, the set speed is
applied again.
On downhill slopes, the limiter can exceed
the set speed. In this case, the stored speed
flashes in the display and a warning tone
sounds.
Cruise control is ready for use at speeds
above 30 km/h. With the limiter, speeds of
30 km/h and over can be set as the maximum
speed.
Cruise control and limiter cannot be activa-
ted at the same time.
Activating cruise control or the limiter
X
Press top (cruise control) or bottom (lim-
iter) of button :.
The ¯ (cruise control) or È (limiter)
button appears in the instrument cluster
display.
Storing the current speed
X
Press ® button ;.
Limiter: the stored speed appears next to
the È symbol in the instrument cluster
display.
Cruise control: the stored speed appears
next to the ¯ symbol in the instrument
cluster display.
Adjusting the stored speed
X
Press ® button ; or g until the
desired speed is reached.
Interrupting cruise control and the
limiter
X
Press ± button ?.
The stored speed can be accessed again
later.
The stored speed is deleted when the engine
is switched off.
Calling up the stored speed
X
Press ° button =.
X
Cruise control: release the accelerator
pedal.
Deactivating cruise control or the lim-
iter
X
Press button : to the OFF centre position.
The ¯ or È symbol in the instrument
cluster display goes out. The stored speed
is deleted.
The stored speed is deleted when the engine
is switched off.
Charging the high-voltage battery
Please note
G
DANGER
The vehicle's high voltage electrical sys-
tem is under high voltage. If you modify