Hollyland Solidcom C1 Pro User Manual page 3

Operation Guide
① Install the battery.
• Single-Ear Wireless Stereo Headset
Step 1: Slide the battery
compartment cover lock.
• Double-Ear Wireless Stereo Headset
Step 1: Slide the battery
compartment cover lock.
② Turn on the master headset and remote headsets.
Master Headset Startup
Single-Ear Wireless Stereo Headset / Double-Ear Wireless Stereo Headset same
*
operating scheme.
Step 2: Open the cover.
Step 2: Open the cover.
1. Ensure that all the headsets are turned
ON.
2. The indicator light stops flashing and
stays ON when the master headset is
Nameplate
successfully connected with the remote
Power Toggle
headsets.
3. Red nameplate: Master headset
Blue nameplate: Remote headset
EN-2
Step 3: Place the battery into the
compartment and close the cover.
Step 3: Place the battery into the
compartment and close the cover.