Page 1
Solidcom C1 Pro Wireless Stereo Headset User Manual V2.0.0...
Page 3
Product Inte aces Batte Compa ment A Button Speaker (Press and hold the A button for 5 seconds for pairing in a system without a hub/Press the A button to switch to group A headsets Power Toggle in a system with a hub.) ENC Microphone ENC/Battery/Connection Indicator Volume + Button...
Page 4
Operation Guide Microphone Boom Indicator Description The states are described below. ① ① Indicator light ashes: Unconnected (for remote headsets) * ② Indicator light ashes quickly: Pairing (The indicator light color is subject to the current state during pairing.) ③ Indicator light stays ON: Master headset turned ON/Remote headset connected successfully A.
Page 5
Operation Guide ① ② Button/Switch Description ① ① TALK/MUTE Button 1. Press the button to switch to the TALK mode, and press the button again to switch to the MUTE mode. In this case, the indicator light turns red. 2. Press and hold the button to switch to the TALK mode (PTT function), and then release the button to switch to the MUTE mode.
Page 6
Parameters Transmission Range 1,100ft (350m) LOS Frequency Band 1.9 GHz (DECT) (varies by count and region) Modulation Mode GFSK TX Power ≤21dBm (125.9 mW) RX Sensitivity <-90dBm Batte Capacity 700mAh(2.66Wh) Charging Time About 2.5 hours ENC OFF: 150Hz–7kHz ( uctuation range: ±6dB) Frequency Response ENC ON: 150Hz–7kHz ( uctuation range: ±10dB)...
Safety Precautions Do not place the product near or inside heating devices (including but not limited to microwave ovens, induction cookers, electric ovens, electric heaters, pressure cookers, water heaters, and gas stoves) to prevent the batte from overheating and exploding. Do not use non-original charging cases, cables, and batteries with the product.
Page 8
Suppo If you encounter any problems in using the product or need any help, please contact Hollyland Suppo Team via the following ways: Hollyland User Group HollylandTech HollylandTech HollylandTech suppo @hollyland-tech.com www.hollyland-tech.com...
Page 9
All copyrights belong to Shenzhen Hollyland Technology Co., Ltd. Trademark Statement Without the written approval of Shenzhen Hollyland Technology Co., Ltd., no organization or individual may copy or reproduce pa or all of any written or illustrative content and disseminate it in any form.
FCC Requirement Any changes or modi cations not expressly approved by the pa y responsible for compliance could void the user's authority to operate the device. This device complies with Pa 15 of the FCC Rules. Operations are subject to the following two conditions: (1) This device may not cause harmful inte erence.
Need help?
Do you have a question about the Solidcom C1 Pro and is the answer not in the manual?
Questions and answers