Tech Controllers EU-MWN-1 User Manual

TECH STEROWNIKI II Sp. z o.o. company ensures to the Buyer proper operation of the device for the period of 24 months from
the date of sale. The Guarantor undertakes to repair the device free of charge if the defects occurred through the manufacturer's fault. The
device should be delivered to its manufacturer. Principles of conduct in the case of a complaint are determined by the Act on specific terms
and conditions of consumer sale and amendments of the Civil Code (Journal of Laws of 5 September 2002).
CAUTION! THE TEMPERATURE SENSOR CANNOT BE IMMERSED IN ANY LIQUID (OIL ETC). THIS MAY RESULT IN DAMAGING THE
CONTROLLER AND LOSS OF WARRANTY! THE ACCEPTABLE RELATIVE HUMIDITY OF THE CONTROLLER'S ENVIRONMENT IS 5÷85% REL.H.
WITHOUT THE STEAM CONDENSATION EFFECT. THE DEVICE IS NOT INTENDED TO BE OPERATED BY CHILDREN.
The costs of unjustifi able service call to a defect will be borne exclusively by the buyer. The unjustifi able service call is defi ned as a call
to remove damages not resulting from the Guarantor's fault as well as a call considered unjustifi able by the service after diagnosing the
device (e.g. damage of the equipment through the fault of the client or not subject to Warranty), or if the device defect occurred for reasons
lying beyond the device.
In order to execute the rights arising from this Warranty, the user is obliged, at his own cost and risk, deliver the device to the Guarantor
along with a correctly fi lled-in warranty card (containing in particular the sale date, the seller's signature and a description of the defect)
and sales proof (receipt, VAT invoice, etc.). The Warranty Card is the only basis for repair free of charge. The complaint repair time is 14
days.
When the Warranty Card is lost or damaged, the manufacturer does not issue a duplicate.
......................................
seller's stamp
SAFETY
Before using the device for the first time the user should read the
following regulations carefully. Not obeying the rules included in
this manual may lead to personal injuries or controller damage. The
user's manual should be stored in a safe place for further reference.
In order to avoid accidents and errors it should be ensured that
every person using the device has familiarized themselves with the
principle of operation as well as security functions of the controller.
If the device is to be sold or put in a diff erent place, make sure that
the user's manual is there with the device so that any potential user
has access to essential information about the device.
The manufacturer does not accept responsibility for any injuries or
damage resulting from negligence; therefore, users are obliged to
take the necessary safety measures listed in this manual to protect
their lives and property.
We are committed to protecting the environment. Manufacturing
electronic devices imposes
environmentally safe disposal of used electronic components and
devices. Hence, we have been entered into a register kept by
the Inspection For Environmental Protection. The crossed-out bin
symbol on a product means that the product may not be disposed
of to household waste containers. Recycling of wastes helps to
protect the environment. The user is obliged to transfer their used
equipment to a collection point where all electric and electronic
components.
WARRANTY CARD
an obligation of providing
WARNING
• The device should be installed by a qualified electrician.
• The regulator is not intended to be used by children.
• It is a live electrical device. Make sure the regulator is
disconnected from the mains before performing any activities
involving the power supply (plugging cables, installing the
device etc.).
• Any use other than specified by the manufacturer is forbidden.
EU DECLARATION OF CONFORMITY
for
Hereby, we declare under our sole responsibility that EU-MWN-1
manufactured by TECH STEROWNIKI II Sp. z o.o., head-quartered
in Wieprz Biała Droga 31, 34-122 Wieprz, is compliant with Directive
2014/53/EU of the European parliament and of the Council of 16 April
2014 on the harmonisation of the laws of the Member States relating
to the making available on the market of radio equipment, Directive
2009/125/EC establishing a framework for the setting of ecodesign
requirements for energy-related products as well as the regulation by
the MINISTRY OF ENTREPRENEURSHIP AND TECHNOLOGY of 24 June
2019 amending the regulation concerning the essential requirements
as regards the restriction of the use of certain hazardous substances in
electrical and electronic equipment, implementing provisions of Directive
(EU) 2017/2102 of the European Parliament and of the Council of 15
November 2017 amending Directive 2011/65/EU on the restriction
of the use of certain hazardous substances in electrical and electronic
equipment (OJ L 305, 21.11.2017, p. 8).
For compliance assessment, harmonized standards were used:
PN-EN IEC 60730-2-9 :2019-06 art. 3.1a Safety of use
PN-EN 62479:2011 art. 3.1 a Safety of use
ETSI EN 301 489-1
compatibility
ETSI EN 301 489-3
compatibility
ETSI EN 300 220-2 V3.2.1 (2018-06) art.3.2 Effective and coherent use
of radio spectrum
ETSI EN 300 220-1 V3.1.1 (2017-02) art.3.2 Effective and coherent use
of radio spectrum
EN IEC 63000:2018 RoHS
Wieprz, 06.05.2021
..............................
V2.2.3 (2019-11) art.3.1b
V2.1.1:2019-03 art.3.1 b
date of sale
Electromagnetic
Electromagnetic