Technical Data; Before Commissioning - Scheppach JCL150 Translation Of Original Instruction Manual

m WARNING
This power tool generates an electromagnetic field dur-
ing operation. This field can impair active or passive
medical implants under certain circumstances. In or-
der to prevent the risk of serious or deadly injuries, we
recommend that persons with medical implants consult
with their physician and the manufacturer of the medi-
cal implant prior to operating the power tool.

6. Technical data

Rated voltage
Rated input
Protection class
Idle speed n
o
Tool attachment Ø
Weight
Subject to technical changes!
Noise/vibration information
m WARNING!
Working without hearing protection or protective cloth-
ing can result in damage to health.
• Wear hearing protection and appropriate protective
clothing when working.
Measured as per EN 62841. The noise at the work
place can exceed 85 dB. In this case, protective meas-
ures for the user are required (wear suitable hearing
protection).
Sound power level L
WA
Guaranteed sound power level
L
WA
Sound pressure level L
pA
Uncertainty K
wa/pA
The above mentioned values are device emissions
values and therefore do not necessarily represent safe
work place values. The correlation between emission
and exposure levels cannot reliably lead to a deriva-
tion of whether additional precautionary measures are
necessary or not.
Factors that could influence the respective emissions
level present at the work place include the specification
of the working area and the environment, the duration
230-240 V~ / 50 Hz
150 W
II
1300 min
-1
110 mm
1.7 kg
84 dB
87 dB
76 dB
3 dB
www.scheppach.com
of exposure, other noise sources and more.
Also pay attention to any possible deviations in the na-
tional regulations for the reliable work place values.
However, the above mentioned information makes it
possible for the user to make a better assessment of
the dangers and risks.
Vibration emission value a
tions) and uncertainty K determined per EN 62841.
Vibration emission value (3-axle)
Vibration (rear handlef) a
Vibration (front handle) a
h
Uncertainty K
7.

Before commissioning

• Open the packaging and carefully remove the de-
vice.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the device and accessory parts for transport
damage.
• If possible, keep the packaging until the expiry of the
warranty period.
m ATTENTION
The device and the packaging are not children's
toys! Do not let children play with plastic bags,
films or small parts! There is a danger of choking
or suffocating!
• The brush must be able to run freely.
• Before pressing the on/off switch, make sure that the
brush is correctly fitted and that moving parts run
smoothly.
• Before connecting the machine, make certain that
the data on the type plate matches with the mains
power data.
Connection to the mains
Check whether the network to which you connect the
machine is properly earthed according to the valid
standards and whether the outlet is in good condition.
(vector sum, three direc-
h
= 1.8 m/s²
h
= 2.4 m/s²
= 1.5 m/s²
GB | 23