Table of Contents
Advertisement
Moving the cursor
The cursor can be moved to the desired position by
repeating the DOWN/OFF button. After the desired character
appears, press the DOWN/OFF button, and the cursor moves
one space to the right.
Movement of the cursor
initial cursor
position
The cursor blinks.
Move the cursor to the desired position by
pressing the DOWNI/OFF button.
The cursor
blinks.
Select a character by pressing the UP/ON
button.
The selected
character
blinks.
Press the DOWN/OFF button to set the -
selected character, and the cursor moves one
space to the right.
The cursor
blinks.
Set the title characters by repeating Step 1 through 3 shown
above.
DXC-325 (UC)
DXC-325P (EK)
$34
¢ The AUTO W/B BALANCE switch can also be used for
character setting instead of the UP/ON and DOWN/OFF
buttons. To set the character position, set the switch to
BLK (same function as the DOWN/OFF button), and to set
the character, set the switch to WHT (same function as the
UP/ON button).
¢ To replace a character which has been set with a new one,
return the cursor to the character's position, select the
desired character with the UP/ON button, and Pisses the
DOWNIOFF button.
The characters must be changed one by < one as it is
described in this section.
Memory of the title characters
The characters and their displayed positions are stored in
the memory (about 12 hours) after the character display
mode is cancelled or after the power is turned off.
HUTTE
1 MENERAL
HECCRID
TION
Advertisement
Table of Contents
