Table of Contents
Advertisement
HALHHUTTITH
i. GENERAL
DESCRIPTION
Connections
Before making connections, make sure that the power
switches of the camera and other equipment are turned off.
VIR
S-VHS format VTR
Sai
to camera
—
ESL
SSS
When using a VTR which records with a composite video
signal next time, change the setting of the OUTPUT selector
to VBS.
DXC-325/325P
(supplied or optional)
*The camera cable can be extended
VIDEO OUT
up to 10 meters (33 feet).
When monitoring
the screen using
a video monitor
Video monitor
® Picture monitoring of the Y/C seperate signal is possible if
the monitor is equipped with the S video input jacks.
Connect the VTR and the S video input jacks of the
monitor. In this case, connection between the VIDEO OUT
connector of the camera and the monitor is unnecessary.
* Superimposed title characters (see page-46) do not appear
on the screen when the Y/C separate signal is output
through the CCQ-BRS camera cable. Connect a TGR-325
title generator (Optional) to the TITLE connector, and the
characters superimposed by the TGR-325 can be seen on
the viewfinder or the monitor connected to the VIDEO OUT
connector of the camera.
DXC -325 (UC)
DXC-325P (EK)
Advertisement
Table of Contents
