Table of Contents
Advertisement
Power from the Battery Pack Compartment
(An NP-1A Battery Pack)
Use a fully charged NP-1A battery pack (optional) by inserting
it into the battery pack compartment.
Installing an NP-1A battery pack
1
Pull up the lid of the battery case.
2
Install the battery pack, and close the lid.
Push this part
and pull up.
Battery pack
compartment
Battery life
Continuous operation time
When using one fully charged NP-1A: About 120 minutes
Battery life warning
When the battery is nearly exhausted, the warning ":BATT:
EMPTY?" appears on the viewfinder screen. If you continue
to use the battery after the "BATT: EMPTY?" warning has
appeared, the BATT indicator of the viewfinder also lights up
to indicate that the battery must be replaced immediately.
Battery charging
Recharge the NP-1A battery pack before each use, using the
BC-1WA battery charger. It takes about 60 minutes at the
normal temperature. For details on recharging, refer to the
battery charger's instruction manual.
DXC - 325 (UC)
DXC-325P (EK)
1-11
Advertisement
Table of Contents
