Troubleshooting - RedMax EBZ9000 Operator's Manual

The engine does not start
Check Possible
cause
Stop switch. The stop
switch is in the
stop position.
Starter pawls. The starter
pawls cannot
move freely.
Fuel tank. Incorrect fuel
type.
Spark plug. Spark plug is
dirty or wet.
The electrode
gap on the
spark plug is
incorrect.
Spark plug is
loose.
Engine starts but stops again
Check Possible
cause
Fuel tank. Incorrect fuel
type.
Air filter. The air filter is
clogged.
18

Troubleshooting

Solution
Let an approved service agent replace the stop switch.
Remove the starter cover and clean around the starter pawls.
Let an approved service agent help you.
Drain the fuel tank and fill it with the correct fuel.
Make sure that the spark plug is dry and clean.
Clean the spark plug. Make sure that the electrode gap is correct. Make
sure that the spark plug has a supressor.
Refer to technical data for the correct electrode gap.
Tighten the spark plug.
Solution
Drain the fuel tank and fill it with the correct fuel.
Clean the air filter.
2318 - 002 - 17.11.2023