Product Overview - Eneo IAM-5SE1004IUP Quick Installation Manual

PRODUCT OVERVIEW

The product is Industrial 4-Port Gigabit PoE++ 1-Port Gigabit RJ-45 1-Port Gigabit SFP Un-
managed Ethernet Switch�
The switches provide 4*10/100/1000Mbps Ethernet RJ-45 ports, 1*10/100/1000Mbps Eth-
ernet RJ-45 uplink port, 1*1000Mbps SFP uplink port� It meets IEEE 802�3af/at/bt standard�
Uplink RJ-45 port supportsup to 90W PoE++ power input� All downlink RJ-45 ports support
Power-over-Ethernet (PoE++), which can deliver up to 90W power per port�
The switches support the Q-PoE (Quick PoE) technology, which enables PoE power supply
immediately upon switch startup without waiting for switch system software control�
The switches support 2 working modes through DIP switch: Default and CCTV� Under CCTV
mode, the transmission distance is extended up to 250m, but the rate is limited to 10Mbps� It
can be widely used in video security monitoring systems, network projects, etc�
Indicator
Indicator
PWR1/PWR2 Power Supply Indicator
ALM Alarm Indicator
DIP Switch
Mode Description
Default All ports are free to communicate, transmission distance: 0~100m�
CCTV The transmission distance is extended up to 250m, but the rate is limited to 10Mbps�
Init Button
By pressing the button for more than 5s, the switch will be restored to the original factory
default setting�
8
Color Status
Solid On
Green
Off
Solid On
Red
Off
Description
Power supply is on�
Power supply is off�
The device alarms
The device is working normally�