fantastic furniture Nook Quick Start Manual page 7

Step 5
You will need
1 x Dowel 1 x Cam Nut
(H1) (H4)
1 x Bolt 1 x Allen key
(H5) (H6)
Phillips Head
Screwdriver
Insert 1 x Dowel (H1) and 1 x Cam Nut (H4) into Bottom Panel (P2). Rotate the cam nut so the
arrow points towards the incoming bolt. Attach Leg (P8) to Bottom Panel (P2), then tighten
the cam nut with a Phillips Head Screwdriver. Attach Leg (P8) to Rail (P3) using 1 x Bolt (H5),
tightening with the Allen Key (H6).
Step 6
You will need
1 x Cam Nut
1 x Dowel
(H1) (H4)
1 x Bolt 1 x Allen key
(H5) (H6)
Phillips Head
Screwdriver
Insert 1 x Dowel (H1) and 1 x Cam Nut (H4) into Bottom Panel (P2). Rotate the cam nut so the
arrow points towards the incoming bolt. Attach Leg (P6) to Bottom Panel (P2), then tighten
the cam nut with a Phillips Head Screwdriver. Attach Leg (P6) to Rail (P3) using 1 x Bolt (H5),
tightening with the Allen Key (H6).
fantasticfurniture.com.au
(P3)
H5
H1
(P8)
(P2)
This is how a cam nut works........
H4
(P3)
H5
(P2)
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
(P6)
H1
H4
Page 7