fantastic furniture Nook Quick Start Manual page 11

Step 13
You will need
10 x Cam Nuts Phillips Head
(H4) Screwdriver
Two People
Required
Carefully turn the co ee table over. Insert 10 x Cam Nuts (H4) into Rails (P3 x 2 & P4 x 2).
Rotate the nuts so the arrows point towards the incoming bolts. Attach Top Panel (P1) to
Rails (P3 x 2 & P4 x 2) as shown, tightening the cam nuts with the Phillips Head Screwdriver.
Step 14
You will need
1 x Cam Nut
2 x Dowels
(H4)
(H1)
Phillips Head
Screwdriver
Insert 2 x Dowels (H1) into Bottom Panel (P2). Insert 1 x Cam Nut (H4) into Support Leg (P9).
Rotate the cam nut so the arrow points towards the incoming bolt. Attach Support Leg (P9)
to Bottom Panel (P2), then tighten the cam nut with a Phillips Head Screwdriver.
fantasticfurniture.com.au
(P4)
H4
H4
(P3)
(P9)
H4
(P4)
(P1)
H4
H1
H1
(P2)
(P3)
H4
H4
Page 11