LEGRAND 6338 26 Instruction Manual

5 Port fast Ethernet Switch
6338 26

Introduction

The Legrand 5 Port fast Ethernet Switch supports up to five computer connection in an Ethernet local area
network at a throughup of up 200Mbps, and acts as a high-speed termination point for digital data service.

Description

The Legrand 5 Port fast Ethernet Switch improves computer performance by providing dedicated
bandwidth to every user, and offers the following benefits:
- Automatically adjusts each port to the highest speed available; No configuration/service interruptions when
migrating from 10Mbps to 100Mbps
- Multiple switches can be cascaded together using a standard Cat 5 crossover patch cable

Power requirements

The 5 Port fast Ethernet Switch's power requirements are:
- Voltage: +12 VDC
- Current: 300 mA
- Power: 4 W Max
- Polarity: Tip (+) Barrel (-)
Note: Legrand offers several options for power, which range from a dedicated power cube designed
to accommodate one module to power solutions designed to accommodate multiple module installations.

Installation

A. Mount the switch onto the enclosure.
- Pull out the plungers which are located at each corner of the 5 Port fast Ethernet Switch
- To mount the bracket with module into the enclosure, insert the tabs on the left side of the bracket
into the slots in the enclosure and push the bracket pushpin into the appropriate hole in the enclosure
to secure the bracket (with module) to the enclosure
B. Terminate wiring
NOTE: The following example illustrates one use of the 5 Port fast Ethernet Switch.
- Terminate each Cat 5e cable run at it's respective wallplate w/RJ45 connector
- Run another Cat 5e jumper from the Cascade Out port on the Ethernet Switch to one of the ports on
the Router.
H D
T C
W I
T S
N E
E R
T H
T E
A S
T F
O R
5 P
+
A
-
0 0 m
@ 3
D C x .
M a 4
1 2 V
4 W
R 3
W E
P O
I N
2
L N
1
1 0 0
0 0 2
A 1
5
C T
K / A