GET SX1 PRO 2T Manual page 4

SX1 PRO 2T is a fully programmable plug&play ECU. SX1 PRO
2T is the best solution for both stock and modified engines:
it is possible to adjust the calibration map with GET MAYA
software (sold separately).
MAIN FEATURES OF SX1 PRO 2T:
• Get the best performance from your engine
The SX1 PRO 2T kit is a Racing kit developed to work perfectly
on standard configuration engines, allowing them to reach
their maximum performance level without compromising
reliability.
ATTENTION: If you use a racing exhaust or other significant
modifications to the standard configuration, an adjustment of
the mapping will be necessary.
• Easy to install and program
The SX1 PRO 2T control unit is a plug&play device that does
not require tools for installation: install it in a few minutes and
get ready to hit the track! You can professionally adjust all the
specific data using Maya, the GET Programming software which
lets you configure the control unit completely.
• Two pre-installed racing maps
The SX1 PRO 2T control unit comes with two maps developed
by the GET R&D department, which can be selected the original
Map Switch:
- Map 1: Racing, for maximum power
- Map 2: Wet, maximum traction even in conditions of poor grip
(wet and/or muddy surfaces).
EN
4