GET SX1 PRO 2T Manual page 10

1.
Remove the protection
caps and
the RESET TPS cable
(included in the package)
to the "MAIN" connector
of the SX1 PRO 2T control
unit. As an alternative
to the RESET TPS cable,
you can use the original
Wake-up
supplied
motorcycle by connecting
it to the diagnosis socket.
2.
Connect a fully
charged 12V battery to
the "RESET TPS" cable:
first the red wire to the
positive (+) pole and then
the black wire to the
negative (-) pole.
3.
Rotate the throttle
fully to
position and wait at
least 5 seconds. The
final positions of the
exhaust
analyzed and saved -
the operation is clearly
Wait
audible.
you no longer feel any
adjustment movement
coming from the motor.
EN
connect
connector
with the
the open
valve are
until
2
5 sec.
10
1