Safety Precautions - GET SX1 PRO 2T Manual

ENGLISH
A. WARNINGS FOR CORRECT USE
Read all instructions and warnings carefully before using the
GET SX1 PRO 2T control unit. Failure to read and/or follow the
instructions and warnings may lead to incorrect use of the device
or its malfunction, with consequent damage to the Product and
personal injury.
THE SX1 PRO 2T ECU KIT IS INTENDED EXCLUSIVELY
FOR RACING USE.

SAFETY PRECAUTIONS

1. Follow the instructions provided in this manual to avoid
damaging the motorcycle.
2. Do not modify or replace the materials provided by GET.
3. Always ensure that no installed components can interfere
with hot engine parts, steering components or the rider.
4. This Product is not a toy. Keep out of reach of children and/
or animals, since it contains small components that could be
swallowed.
5. Do not use the Product for purposes other than those
specified in these instructions.
6. Do not use high pressure washers on the Product.
IMPORTANT INFORMATION
1. Always make sure that the SX1 PRO 2T control unit is
correctly installed and functioning before use.
2. Never expose the device to temperatures above 70°C/158°F.
3. Install the unit when the engine is cold.
4. The SX1 PRO 2T control unit might not work properly if the
original TPS sensor is damaged or has been modified.
5. The RPM limiter threshold of the SX1 PRO 2T maps is higher
than the threshold for the standard ECU.
EN
2