Led Display; Error Codes - Hover-1 H1-ACE3 Owner's Manual

LED DISPLAY

CRUISE CONTROL
HEADLIGHT SPEED
TRIP
mile
km
LOCK BRAKE ECO MODE
BLUETOOTH MILEAGE
KICK TO START MODE
SPORT MODE
DRIVE MODE
WALK MODE
31

ERROR CODES

The electronics system has the ability to self-diagnose and report a limited set of errors.
Errors will appear on the screen as error codes.
The chart below explains the meaning of each error code:
Error Code Error
E1 Brake Error
E2 Accelerator Error
Communication
E3
Error
Over Voltage
E6
Protection
E7 Hall Error
E9 Controller Error
Solution
Brake assembly failure, or communication
error with the controller.
Accelerator assembly failure, or
communication error with the controller.
Communication error between the
instrument panel and the controller.
Damaged wire or loose connector, or faulty
instrument panel or controller.
Battery voltage is too high.
Battery has a fault.
Loose/disconnected motor connector,
damaged motor wire, or faulty motor.
Controller error. Restart the scooter.
32