Cruise Control; Kick To Start; Riding Your Ace E-Scooter; Operating Your Device - Hover-1 H1-ACE3 Owner's Manual

CRUISE CONTROL

Cruise control comes preset as active with the Ace. To engage cruise control, press the
throttle down and maintain a constant speed for 6 seconds; cruise control will
automatically activate. You will hear 2 beeps, and the cruise control indicator will flash
on the display to indicate that it is activated. Press the throttle down once or squeeze
the brake handle to cancel cruise control. You can quickly press the power button 4
times to disable or re-enable cruise control.

KICK TO START

For safety reasons, the E-Scooter will not accelerate unless it is already moving at least
1.8 mph (3 km/h). You must first kick o the ground and then press the throttle in order
to ride the E-Scooter. You can disable kick to start by quickly pressing the power button
5 times.

RIDING YOUR ACE E-SCOOTER

FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS
CAN LEAD TO DAMAGE TO YOUR DEVICE, VOID YOUR MANUFACTURER WARRANTY,
LEAD TO PROPERTY DAMAGE, CAUSE SERIOUS BODILY INJURY OR DEATH.

OPERATING YOUR DEVICE

Make sure the device is fully charged before the first use. Before turning on your Ace, ride
it like a normal kick scooter to get comfortable with the device before using it with the
motor.
When you are comfortable riding the E-Scooter, power it on. For the motor to activate, you
must first start riding the E-Scooter manually and then push the throttle down with your
thumb.
To slow down, disengage the throttle and squeeze the brake handle to engage the disk
brake. The brake is pressure-sensitive, so a tighter squeeze will provide more stopping
power.
Use the handlebars to turn in the desired direction.
The Ace can be operated manually if you do not wish to use the motor.
Quickly press the power button two times to turn the headlight on/o . Quickly press the
power button three times to switch units between KM/H and MPH. Quickly press the
27
power button six times to switch between the odometer and the trip mileage.
At higher speeds, you may need to shift your weight to maintain your balance while
making turns.
Prepare to brace yourself if you encounter bumps or uneven surfaces, then dismount and
carry your Ace to a safe operating surface.
WARNING
Do not turn sharply or at high speeds. Do not turn or ride quickly along slopes, as it
may cause injury. Proper use of your brake is vital to ensure safe, e icient stopping.
To avoid misuse and potential injury, do not apply sudden or excessive force to your
brake. Apply the brake gradually and give yourself enough room to come to a
complete stop safely.
SPEED & WEIGHT LIMITATIONS
Speed and weight limits are set for your own safety. Please do not exceed the limits listed
in the "SPECIFICATIONS" section of this manual (Page 4).
WARNING
Riding the Ace while exceeding the weight limit may increase the possibility of injury
or product damage.

OPERATING RANGE

• The Ace R350 can travel up to 20 miles on a fully charged battery under ideal riding
conditions. The following are some of the major factors that will a ect the operating range
of your device:
• Terrain: Operating range is highest when riding on a smooth, flat surface. Riding uphill
and/or on rough terrain will reduce operating range significantly.
28