Advertisement
The PIONEER is a personal transporter. Our technology and production processes are developed with strict testing for each PIONEER scooter. Operating the PIONEER without following the contents of this manual may lead to damage to your PIONEER scooter, or bodily injury.
Hover-1 PIONEER Electric Folding Scooter
Your Hover-1 PIONEER's serial number is stamped respectively on the kickstand side of the platform.
Avoid using water or other liquids for cleaning. If water or other liquids enter the PIONEER, it will cause permanent damage to the internal components.
Users who disassemble the PIONEER scooter without permission will void the warranty.
Battery Type: Rechargeable lithium-ion battery
Charge Time: Up to 5 hours
Battery Voltage: 36V Battery Capacity: 6 Ah
Working Temperature: 32°F - 104°F
Charging Temperature: 32°F - 104°F
Storage Time: 1 year
Storage Temperature: -4°F - 104°F
Storage Humidity: 5% - 95%
The lithium-ion battery is built into the device. Do not disassemble the device to remove the battery or attempt to separate it from the device.
the specified charging time. Doing so may cause the battery to become hot, rupture, or ignite. To preserve natural resources, please recycle or dispose of batteries properly. This product contains lithium-ion batteries. Local, state, or federal laws may prohibit disposal of lithium-ion batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options.
Failure to follow the safety precautions listed below could lead to serious bodily injury and/or death.
SEEK IMMEDIATE MEDICAL ASSISTANCE IF YOU ARE EXPOSED TO ANY SUBSTANCE THAT IS EMITTED FROM THE BATTERY.
Model: | H1_PNR |
Net Weight: | 26.7 lbs (12.1 kg) |
Max Supported Weight: | 264 lbs (120 kg) |
Min Supported Weight: | 44 lbs (20 kg) |
Max Speed: | Up to 14 mph (22.54 km/h) |
Max Distance Range | Up to 16 miles (25.76 km) |
Battery Type: | Lithium-ion |
Motor Power: | 300W Brushless Motor |
Battery Voltage: | 36 V |
Battery Capacity: | 6Ah |
Power Requirement: | AC 100-240V, 50/60 Hz |
Folding Size: | (42in. x 16.5in. x 19.2in.) (107cm x 42cm x 49cm) |
Open Size: | (42in. x 16.5in. x 44.8in.) (107cm x 42cm x 114cm) |
Tire Type: | Inflated Rubber Tires |
Tire Size: | 8.5" Front & Rear |
Brake Type: | Handle Activated Rear Disk |
FEATURES/PARTS
Only use the included charging cable and charger to charge your Hover-1 PIONEER Using any other unauthorized charger may damage your Hover-1 PIONEER
Any PIONEER that does not work properly can cause you to lose control and fall. Inspect the entire device thoroughly before every ride, and do not ride it until any problems have been corrected.
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY
ATTACHING THE HANDLEBAR KIT
Attach the handle bar kit by placing it into the steering column, align the front and back screw holes, and tighten the 4 screws into place.
Some parts of your Hover-1 PIONEER can injure you if mishandled. Moving and folding parts can cut skin. Clamps and pivoting parts such as brake levers can pinch. When folding and unfolding your Hover-1 PIONEER, Please watch for pinch points where possible injury may be sustained. Do not leave your hand in these areas during folding or unfolding.
To unfold your PIONEER, press down on the folding clip and pull the steering column up. Raise the safety lock up and push it into place to secure the steering column. You will hear a "click", indicating the steering column is locked. Ensure the steering column is secured in place.
To active high speed mode, ensure the PIONEER is powered on and not in motion. Press the power button twice. The high speed mode indicator should light up on your display to indicate it is activated.
To active cruise control while riding, press the Throttle down two times quickly, you will hear a beep and the cruise control indicator will light up on the LCD display indicating that it is activated; Press the Throttle down once or squeeze the Brake Handle to cancel cruise control.
For safety reasons, the scooter will not accelerate unless it is already moving at least 1.8mph (3km/h). You must first kick off the ground and then press the throttle in order to ride the scooter.
Any PIONEER Scooter that does not work properly can cause you to lose control and fall. Do not ride an PIONEER with a part that is damaged; replace the damaged part before riding.
It is important that you fully understand all elements of your PIONEER scooter. If these elements are not used correctly, you will not have full control of your PIONEER. Before you ride, learn the functions of the various mechanisms on your scooter.
Practice using these elements of your PIONEER at slower speeds in a flat, open area before taking the device out in public areas.
PRE-RIDE CHECKLIST
Ensure that your PIONEER is in proper working order each and every time you ride. If a part of the PIONEER scooter does not function correctly, please contact our Customer Support Center.
FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS CAN AND MAY LEAD TO DAMAGE TO YOUR DEVICE, VOID YOUR MANUFACTURER WARRANTY, LEAD TO PROPERTY DAMAGE, CAUSE SERIOUS BODILY INJURY, AND CAN LEAD TO DEATH.
Make sore the device is fully charged before the first initial Use. Before turning on your PIONEER scooter, ride it like a normal kick scooter to get comfortable with the device before using it with the motor.
When comfortable riding the scooter, power it on. For the motor to activate, you must first start tiding the scooter and then push the throttle down with your thumb.
To slow down the scooter, disengage the Throttle and squeeze the Brake handle to engage the disk brake. The Brake is pressure sensitive so a tighter grip means more stopping power.
To turn, use the handlebar to turn in the direction you wish to turn.
The PIONEER scooter can be operated manually if you do not wish to use the motor.
As you get comfortable on the device, you will notice it becomes easier to maneuver. Remember at higher speeds, it is necessary to shift your weight to overcome the centrifugal force.
Prepare to brace yourself if you encounter bumps or uneven surfaces, then dismount and caw your PIONEER to a safe operating surface.
Do not turn sharply or at high speeds to avoid danger. Do not turn or ride quickly along slopes, as it may cause injury.
Speed and weight limits are set for your own safety. Please do not exceed the limits listed in the "Specifications" section of this manual.
Overweight exertion on the device may increase possibility of injury or product damage.
The following are some of the major factors that will affect the operating range of your device.
*Do not attempt to stop suddenly as this may lead to injury or damage to your brake discs.
Proper use of your brake is vital to ensure safe, efficient stopping. To avoid misuse and potential injury, do not apply sudden or excessive force to your brake. Apply the brake gradually and give yourself enough room to come to a complete stop safely.
Please follow all local, state and federal laws in regards to recycling, handling and disposing of Lithium-ion Battery.
SEEK IMMEDIATE MEDICAL ASSISTANCE IF YOU ARE EXPOSED TO ANY SUBSTANCE THAT IS EMITTED FROM THE BATTERY.
While riding your PIONEER Scooter, if there is a system error or illegal operation performed the device will prompt the User in a variety of ways.
The following are common occurrences where you will see Safety Alerts. These notices should not be ignored, but appropriate action should be taken to correct any illegal operation, failure or errors.
While sustaining a high discharge current during use (such as riding up a steep slope for a long period of time), the device motor will power off after 15 seconds.
Error E1 | Motor hall failure, the motor needs to be replaced |
Error E2 | Accelerator failure, the accelerator needs to be replaced |
Error code E3 | Motor blocking fault, release the accelerator |
Error E4/MOS | Mainboard MOS tube failure, the mainboard needs to be replaced |
Error E6 | Controller / instrument communication failure, the controller needs to be replaced |
Error E7 | Battery over-voltage protection, the battery needs to be replaced |
Error E8 | Controller error, the controller needs to be replaced |
Error E9 | Brake failure, the brake needs to be replaced |
HELMETS SAVE LIVES!
Always wear a properly fitted helmet that complies with CPSC or CE safety standards when you ride your scooter.
Correct Fitting:
Make sure your helmet covers your forehead.
Incorrect Fitting:
Forehead is exposed and vulnerable to serious injury.
As with all mechanical components, the Hover-1 PIONEER is subjected to wear and high stresses. Different materials and components may react to wear or fatigue in different ways. If the design life of a component has been exceeded, it may suddenly fail possibly causing injuries to the rider. Any form of crack, scratch or change of coloring in highly stressed areas indicate that the life of the component has been reached and it should be replaced. Do not ride in an abusive manner.
In this manual, the CAUTION sign indicates a hazardous situation which, if not avoided, can cause minor or moderate injury.
In this manual, the WARNING sign indicates a hazardous situation which, if not avoided, can cause death or serious injury.
Great care should be taken with the Hover-1 PIONEER when folding or unfolding. If you do not understand how to operate the levers, please visit www.Hover-1.com
DO NOT RIDE YOUR HOVER-1 PIONEER WITHOUT ALL RELEASES SECURELY LOCKED.
PLEASE READ THE USER MANUAL THOROUGHLY.
Failure to follow the basic instructions and safety precautions listed in the user manual can lead to damage to your device, other property damage, serious bodily injury, and even death.
Thank you for purchasing the Hover-1 PIONEER. Please read all instructions carefully before using and retain this manual for future use and reference.
This manual applies to the Hover-1 PIONEER.
ATTENTION
Low temperature will affect the lubrication of moving parts inside the PIONEER, increasing internal resistance. At the same time, in low temperatures, the discharge capacity and the capacity itself of the battery will be significantly decreased.
Use caution when riding the PIONEER in cold temperatures (below 40 degrees F).
Doing so may increase the risk of mechanical failures of the scooter, which may lead to damage to your device, other property damage, serious bodily injury and even death.
NOTES:
In this manual, the above symbol with the word "NOTES" indicates instructions or relevant facts the user should remember prior to using the device.
In this manual, the above symbol with the word "CAUTION" indicates a hazardous situation which, if not avoided, can cause minor or moderate injury.
In this manual, the above symbol with the word "WARNING" indicates a hazardous situation which, if not avoided, can cause death or serious injury.
SERIAL NUMBER
Please keep the serial number on file for warranty claims as well as proof of purchase.
Prolonged exposure to UV rays, rain and the elements may damage the enclosure materials. Store indoors when not in use.
Your PIONEER electric folding scooter is not equipped with reflectors. It is not recommended that you ride in conditions of low visibility.
If you are riding your scooter in low-visibility conditions, ensure your LED light is turned on, and that you are wearing bright, reflective clothing.
When you ride in low-visibility conditions such as fog, dusk, or night, you might be difficult to see, which could lead to a collision. To increase your level of safety, be sure wear bright, reflective clothing when riding in poor lighting conditions.
Think about safety when you ride. You can prevent many accidents if you think about safety. Below is a helpful checklist for riders.
SAFETY CHECKLIST
Proper use of your brake is vital to ensure safe, efficient stopping. To avoid misuse and potential injury, do not apply sudden or excessive force to your brakes. Apply your brakes gradually and give yourself enough room to come to a complete stop safely.
When you ride in low-visibility conditions such as fog, dusk, or night, you might be difficult to see, which could lead to a collision. In addition wear bright, reflective clothing when riding in poor lighting conditions.
There may be additional risk to injury if you use your scooter incorrectly. This includes, but is not limited to:
The aforementioned examples add stress to each part of your scooter and can lead to long term damage of the device. Damage to your scooter can lead to an accident or increase your risk of injury. To decrease your risk of injury, use your scooter correctly.
To reduce the risk of injury, adult supervision is required. Never use in roadways, near motor vehicles, on or near steep inclines or steps, swimming pools or other bodies of water; always wear shoes, and never allow more than one rider.
To reduce the risk of injury, adult supervision is required. Never use in roadways, near motor vehicles, on or near steep inclines or steps, swimming pools or other bodies of water; always wear shoes, and never allow more than one rider.
@RideHover1
Manufacturer: DGL Group, Ltd.
195 Raritan Center Parkway Edison, NJ 08837
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the PIONEER and is the answer not in the manual?
Questions and answers