Setting Up Your E-Scooter - Hover-1 H1-ACE3 Owner's Manual

SET TING UP YOUR E-SCOOTER
Attaching the Handlebar Assembly
Attach the handlebar assembly by placing it into the steering column. Align the
front and back screw holes, and tighten the 6 screws into place using the hex keys
provided.
Pinch Points
Some parts of your Ace can injure you if mishandled. Moving and folding parts
can cut skin. Clamps and pivoting parts such as brake levers can pinch. When
folding and unfolding your Ace, Please watch for pinch points where injury may
be sustained. Do not leave your hand in these areas while folding or unfolding.
15
Folding & Unfolding Your E-Scooter
To fold your Ace, pull the folding hinge release button up and push the folding
hinge down. Push the steering column down to the rear fender. Align the folding
hook with the slot in the rear fender and push the folding hook into it to lock the
Ace in a folded position.
To unfold your Ace, push down on the rear fender slot to unlock the folding hook.
Raise the steering column up until it is pointing straight up and clicks into place.
Pull the folding hinge up and press it against the steering column to ensure it is
securely locked.
16