Led Display; Error Codes - Hover-1 Pro Series ACE R450 Owner's Manual

LED DISPLAY

CRUISE CONTROL
HEADLIGHT SPEED KICK TO START MODE
TRIP
mile
km
LOCK BRAKE ECO MODE
BLUETOOTH MILEAGE
SPORT MODE
DRIVE MODE
WALK MODE
31

ERROR CODES

The electronics system has the ability to self-diagnose and report a limited set of
errors. Errors will appear on the screen as error codes.
The chart below explains the meaning of each error code:
ADVANCED MATRIX DISPLAY
Error Code Error
E1 Brake Error
E2 Accelerator Error
Communication
E3
Error
Over Voltage
E6
Protection
E7 Hall Error
E9 Controller Error
ERROR CODE CHART
Solution
Brake assembly failure, or
communication error with the
controller.
Accelerator assembly failure, or
communication error with the
controller.
Communication error between the
instrument panel and the controller.
Damaged wire or loose connector, or
faulty instrument panel or controller.
Battery voltage is too high.
Battery has a fault.
Loose/disconnected motor
connector, damaged motor wire, or
faulty motor.
Controller error. Restart the scooter.
32