Aluminium Filter; Carbon Filter (Usage Without A Flue) - Beko BHCA66641BBHS User Manual

the key lock before performing control
panel cleaning. Otherwise, incorrect de-
tection may occur on the keys.

6.3 Aluminium Filter

This filter serves to retain oil particles in the
air. It is recommended to clean the filter
once a month under normal usage. To
achieve this:
1. Remove the aluminium filters.
2. Wash the filters in water using liquid de-
tergent and reinstall after drying.
Aluminium filters may change colour as
they are washed; this is normal and does
not require replacing your filters.
You can also wash the aluminium
filter in the dishwasher. (max. 70
°C)
Removing aluminium filters
1. Open hood cover upwards and pull alu-
minium filter lock downwards as shown
in the figure.
* The damper is optional. It may not be avail-
able in your product.
2. Gently pull the filter towards you first
and pull it upwards to remove it from its
slot.
3. Reinstall the aluminium filter in its slot
after flushing by following the above
steps in reverse.
6.4 Carbon Filter (Usage without a
flue)
General warnings
• If you have installed your product without
a flue, you should replace your carbon fil-
ters every 4 months in normal use. You
can obtain the carbon filter from Author-
ized Services.
• The carbon filter should never be
washed.
• If you do not follow the rules for cleaning
and replacing the filters of your hood, you
may cause a fire.
In carbon-filtered usage, the sound
level increases and the flow rate
performance decreases.
Removing carbon filters
1. Open the glass cover of the hood and re-
move the aluminium filter.
2. Unscrew the carbon filters on the right
and left of the motor holder.
EN / 18
EN
DE
PL
ES