Syncing Two Bases (Optional) - Ergomotion Ergo Box Owner's Manual

Syncing Two Bases
Two SmartSync® Cords are included with the base. Not available on Queen, Full or Full-long size bases. Two
SmartSync® Cords realize the synchronization through transfer lines.
STEP 1
Unplug bases from power source.
STEP 2
Connect the SmartSync® Cord to transfer lines separately.
STEP 3
Plug bases back into the power source.
STEP 4
Check to ensure all cords are securely attached. Both remotes will now
operate both bases simultaneously.
The system is now linked. Buttons pressed on either remote will
control both bases simultaneously.
Control Box 1
Transfer Line
SmartSync ® Cord
PERFORMANCE NOTES
If bases become mismatched, pressing the FLAT button will re-sync the
mechanical positions.
Control Box 2
SmartSync ® Cord
Shroud
21