11 Troubleshooting
2. Press the two locking tabs together to release the
fan drawer and carefully pull the enclosure with the
fan out downward.
3. Disconnect the fan connector in the unlocked state.
4. Clean the fan assembly with a soft brush or a vacuum cleaner.
5. Reinstall the serviced fan assembly in the inverter.
6. Recommission the inverter (see Section 7.3, page 60).
11.5 Manual restart after electric arc
You can use the following parameter to resume feed-in operation after an electric arc has been
detected.
Channel
Operation.OpMod
98
STPxx-50-BE-en-11
Name
General operating mode
SMA Solar Technology AG
1
2
Settings
Start
Operating manual
1