Leica CINE 1 Quick Start Manual page 32

In the case of a studded drywall
▸ Use a stud detector to find the studs that lie behind the paper template (
▸ Follow the vertical line on the paper template and mark the positions of the lower screws in the suggested area.
▸ Drill holes for the four screws at the marked points.
▸ Remove the paper template and use the screws to fasten the wall brackets (
Note: hold the wall brackets while tightening the screws to prevent them from slipping.
In the case of a solid concrete or hollow block wall
▸ Drill holes for the top screws.
▸ Follow the vertical line on the paper template (
▸ Remove the paper template and insert four wall plugs (
▸ Ensure that the wall plugs end flush with the wall.
▸ Use the screws to fasten the wall brackets (
Note: hold the wall brackets while tightening the screws to prevent them from slipping.
Note: All screws must be fully tightened to prevent the wall brackets from moving. Ensure that the wall brackets are securely attached to the wall before mov­
ing on to the next step.
Z2
Z2 ) and drill holes for the bottom screws within the intended area.
Z1 ) into the holes.
) in place.
W
). Mark the middle of the studs with a pencil.
W ) in place.