Leica CINE 1 Quick Start Manual page 31

INSTALLING THE WALL BRACKETS
Check the wall type
Studded drywall
Minimum stud size:
standard 51 x 102 mm (2 x 4 inches)
nominal 38 x 89 mm (1½ x 3½ inches)
Prepare the room
▸ Check the size of your room:
• Width: 3 m (~118.11 inches)
• Height: 2 m (~78.74 inches) from the installation area to the ceiling.
• For an optimal visual experience, we recommend a minimum clearance of 4.5 m (177 inches) from the screen.
▸ Recommended stand size:
We recommend positioning the Leica Laser TV on a stand measuring approximately 50 cm (20 inches) high by 42 cm (16 inches) wide.
L1=0.385 m
(15.16")
Install the wall bracket
▸ Note: ensure that you have the paper template (
▸ Measure 1.85 m (73 inches) up from the top edge of the stand for the Leica Laser TV and mark the height with the pencil.
▸ Place the top edge of the paper template in the center of the wall on the mark.
▸ Ensure that the paper template is totally straight.
H=0.411 m
(16.18")
), a pencil, adhesive tape, a spirit level, and a screwdriver to hand.
Z2
Solid concrete or hollow blocks
Minimum solid concrete thickness: 203 mm (8 inches)
Minimum hollow block size:
standard 203 x 203 x 406 mm (8 x 8 x 16 inches)
Place the screen on the wall brackets.
W≥3 m (118.11")
Paper template ( Z2
H3=1.808 m
(71.18")
)
H2=1.878 m H1≥2 m (≥78.74")
(73.94")
Stand height
Spirit level
Paper template (
Z2
)