Installing The Wired Remote Control; Installation - Samsung MWR-SH00 Installation Manual

Installing the Wired Remote Control

Installation

Connect the power cables and communication cables of the
wired remote control to the terminal of indoor unit PCB.
1 Open the wired remote control by using the groove on its top.
2
Secure the rear cover of the wired remote control to the wall
with 2 screws.
3 Connect the V1, V2 terminal of the wired remote control to the
V1, V2 terminal of the indoor unit.
4
Connect the F3, F4 terminal of the wired remote control to the F3,
F4 terminal of the indoor unit.
5
Reassemble the wired remote control.
DB98-28133A-05_IM_SIMPLE Wired Remote_EU_EN_.indd 5
Wired
remote
control
Electrical wires
(Not supplied)
PCB
5
E-
2020-09-28 오후 1:42:33