Features and Specifications
2-4. How to install
2-4-1. Wired remote control installation
1) Insert the flat-head screwdriver into two square grooves at the bottom of the Wired Remote Controller and rotate it
to lift the front cover for removal from the rear cover.
2) Arrange the power cable and the communication cable so that they fit in the housing along the edges of the rear
cover.
8 cm (3.15 inch)8
cm (3.15 inch)
Area A
<When the cable is not concealed>
<When the cable is concealed>
• When connecting the power and communication cables to the bottom of the Wired Remote Controller, first cut off the
area A.
NOTE
2-18