Assembly
Step 3
Using the same position as the previous
step, insert (2) Casters into the Foot as shown.
Repeat this step for the other Leg Upright.
Please
note: When lifting the assembled parts,
make sure the two casters with brakes have the
brake ON to avoid the parts from sliding.
Step 4
Remove the 6 knock o holes from the
Center Back Panel. They are marked in
red circles in the images to the right.
Attach (2) Motor Mount Brackets to
how-con gure-zebra-gk420d-printer-printing-royal-mails-2d-barcode-labels/#:~:text=How%20to%20con gure%20the%20Z
ure%20the%20Zebra%20GK420D%20printer%20for,your%20Royal%20Mail%202D%20barcode%20labels%20in%20Zenstor
printer%20for,your%20Royal%20Mail%202D%20barcode%20labels%20in%20Zenstores.
ext=How%20to%20con gure%20the%20Zebra%20GK420D%20printer%20for,your%20Royal%20Mail%202D%20barcode%2
ra%20GK420D%20printer%20for,your%20Royal%20Mail%202D%20barcode%20labels%20in%20Zenstores.
nstores.com/help/how-con gure-zebra-gk420d-printer-printing-royal-mails-2d-barcode-labels/#:~:text=How%20to%20con
a-gk420d-printer-printing-royal-mails-2d-barcode-labels/#:~:text=How%20to%20con gure%20the%20Zebra%20GK420D%
https://www.zenstores.com/help/how-con gure-zebra-gk420d-printer-printing-royal-mails-2d-barcode-labels/#:
the Center Back Panel using (4) 12mm
Furniture Bolts in the front side and
(2) 20mm Furniture Bolts on the back
side.
x4
12mm Furniture Bolt
14105 Avalon Boulevard, Los Angeles, CA 90061 | Tel 800-465-1660 x1 | Fax 310-353-7109
Casters
Center Back Panel
https://www.zenstores.com/help/how-con gure-zebra-gk420d-printer-printing-royal-ma
x2
20mm Furniture Bolt
Caster w/ Brake
Caster w/out Brake
Motor Mount
Brackets
https://www.zenstores.com/help/how-con gure-z
Center Back Panel
www.Versatables.com
Back Side
https://www.zenstores.com/hel
Front Side
x4
Caster
https://www
Need help?
Do you have a question about the FBC and is the answer not in the manual?