Kärcher Admiral X Manual page 22

Operations
Cleaning Procedure - continued
VACUUM
INTAKE COVER
22
SOLUTION
INTAKE COVER
8.645-740.0 Manual Operator - Admiral X/Admiral XL
4. Start at wall closest to power outlet. For large
areas, operate machine in parallel passes, overlap-
ping brush path. Clean perimeter last.
5. During operation, observe the following: The
Admiral is equipped with clear internal covers to
facilitate operator viewing of dirty solution and
vacuum air flow.
During operation, observe the vacuum intake
cover. Large amounts of water or foam entering the
vacuum system can damage the vacuum motor.
NOTE: If you notice either condition, shut down the
machine immediately.
Empty recovery tank and/or add defoamer to
recovery tank.
6. Use right side of machine for cleaning against
walls.
7. After cleaning, turn rotary switch to off position,
return brush to storage position and carefully
unplug machine.