4
Initial operation
4.1
Safety
CAUTION
Damage to health caused by dirty, polluted or long standing water
Operating the shower functions with dirty, polluted or long standing water can cause
damage to health.
> If the product has NOT been used for two weeks or more, activate the additional
self-cleaning.
4.2
Activating the product
The product must be completely installed and connected to the main power supply
and water supply in accordance with the mounting instructions.
> Ensure that the stop valve is open.
> Switch on the product using the main switch.
4.3
Activate the remote control
4.3.1 Remote control with batteries
1
2
> Pull out the battery
compartment.
> Press the lever to fully
open the battery
compartment.
> Remove the protective
film.
40
3
> Insert the batteries
(CR2032).
> Close the battery
compartment.
1
2