Table of Contents
Advertisement
PREVIEW/START Function
EDIT TOTAL 0:19:47
STOP
CUT-IN
CUT-OUT
0:40:03
0:01:20+ 0:04:05
0:15:03+ 0:18:20
0:20:15+ 0:30:32
0:35:47+ 0:38:15
► SET DELETE
START CLEAR
Preview function
You can preview the editing program. The
PREVIEW function plays all the selected scenes in
the order they will appear on the final tape,
automatically pausing at each "cut-in" and "cut-out"
point to help editing.
1. Use the FlexiZone controller to move
down the screen to the bottom line, and
then across to the PREVIEW function.
Recording to the VCR
(START function)
1. Make sure the VCR is ready to record
and on pause.
2. Use the FlexiZone controller to move
down the screen to the bottom line, and
then across to the START function.
35
2. Press the FLEXIZONE AE button.
• The camera will now play all the scenes in the
order you have programmed them.
■ In PREVIEW mode the tape starts a little
before each "cut-in" point. It will pause for 2.5
seconds precisely at the "cut-in" point. It
pauses again at the"cut-out" point.
3. The editing program starts when you
press the FLEXIZONE AE button.
• The camera automatically records the scenes
you selected onto the tape in the VCR.
Advertisement
Table of Contents
