Table of Contents
Advertisement
Record Search and Record Review
When the camera is in record pause mode, you
When the camera is in record pause mode, you
can use record search to play the tape forwards or
can use record review to play back the last few
backwards to find the point where you want to start
seconds of your recording and then return
or restart recording. This is useful when you want
automatically to record pause mode. You can
to add a new scene to a previously used cassette.
quickly make sure that a scene has recorded
By using record search, you can ensure a smooth,
properly and then go on to shoot the next scene,
1^1
noise-free join between the new scene and the old
without producing any noise in the picture,
one.
1. Make sure the camera is in record
pause mode.
2. Press and hold the REC SEARCH + or -
button while you check the picture in
the viewfinder.
• The + button plays the recording forwards and
the - button plays it backwards.
3. Release the button when you find the
point where you want to start recording.
• The record search picture pauses briefly and
then the camera returns to record pause
mode.
1. Make sure the camera is in record
pause mode.
2. Press and release the ® button (the
REC SEARCH - button) while you check
the picture in the viewfinder.
• The camera rewinds the tape and plays back
the last few seconds.
• The camera returns to record pause mode at
the point where you pressed the button.
Notes:
• Noise or skew (picture distortion) may appear on
the screen during record search and record
review.
• Record search and record review functions can
also be operated with the Custom Keys. (See p.
20 for details.)
Advertisement
Table of Contents
