The Auto Editing Function.51 - Canon UC-V30 Hi8 Instruction Manual

The Auto Editing Function
Using the Auto Editing Function is simple. Just watch your original tape and press
the EXECUTE button on the wireless controller (or the FlexiZone AE Lock button
on the camera body) at the beginning and the end of each scene you want to
record.
This creates an editing program. Start the program, and the camcorder
automatically records the scenes you selected onto the tape in your VCR.
Before you record, you can preview everything (p. 56), change the point where a
scene begins or ends (p. 61), and even delete (p. 59) or re-order scenes (p. 60).
1. Prepare the camera. Connect the video cables, and place it so that
it can control your VCR by remote control.
2. Watch the video. When a part you want to keep starts, press the
EXECUTE button on the wireless controller (or the FlexiZone AE
Lock button). Press the button again at the end of the part you
want to keep. You can choose up to six scenes this way.
Original tape in Camera
g Press
g Press
g Press
g Press
gPress
g Press
Scene 1
I
r
Scene 2
I Scene 3
i—i
Unwanted * 1
3. If you wish, preview the video. You can also re-order scenes, change
the time they start and finish, or even delete them.
• To select a function, a scene, or a time, or to move a scene, use the ▲, T,
►, ◄, arrow keys on the wireless controller (or the FlexiZone controller)! To
activate a function use the EXECUTE button (or the FlexiZone AE Lock
button).
4. When everything is perfect, automatically record it to the VCR.
Choose S1AR1 from the bottom of the screen, then press the
EXECUTE button (or the FlexiZone AE Lock button).
Final tape in VCR