Table of Contents
Advertisement
Playback Connection
Notes:
• If you are going to use the TV as a monitor while
you are shooting, remember to keep the TV
volume turned down as long as the camera's
AUDIO terminals are connected. If the sound
from the TV speakers is picked up by the
microphone, an unpleasant high-pitched squeal,
called feedback, may be produced.
• If you want a mono output, connect the cable to
the camera's left AUDIO terminal ©, but do not
connect the right AUDIO terminal ®. This will
give a combined mono output from both left and
right channels.
If your TV (or VCR) has a SCART terminal
1. Connect the PC-A10 SCART adapter to
3. If you are connecting the camera to a
the TV or VCR's SCART terminal.
VCR, set the input selector on the VCR
to LINE.
2. Connect the camera to the adapter.
• See your TV/VCR instruction manual for
• Connect the camera using the STV-150
details.
Stereo Video Cable. Connect the white plug to
the white audio terminal © (left). Connect the
red plug to the red audio terminal ® (right).
Connect the yellow plug to the yellow video
terminal ® .
You can connect the camera to a TV or VCR in
order to play back your recordings. You will need to
attach a power source to the camera (see p. 7).
Advertisement
Table of Contents
