Chrono Menu - Teba therm TP-16 Installation And User Manual

5.2.4. CHRONO MENU

Press the P3 button to enter the menu. The display shows the
chrono management menu. Enter the modality menu by touching the
P3 button. The screen on the right-up will appear. In the chrono
menu, the daily / weekly / weekend time settings are usually switched on / off. When
turned on, the display will show the time in the left corner and nothing will be visible in the
closed position. When the P2 button is pressed in the modality menu, the timer can be set
to ON or OFF. To select daily, weekly or weekend programming and to set the clock, the
timer menu must be entered with the P3 button. When programming needs to be done, the
steps in the table below should be followed. 3 time slot opening and 3 time slot shutdowns
can be programmed for each day. To set each time slot, use the
flash the time slot on the display and the P4 and P6 buttons to increase or decrease the
time.
After choosing the time slot selection, activate it with
actived, there will be a "√" sign on the right side. Use
use P1 ESC to exit each step.
Example: DAILY PROGRAMMING
Daily
Weekly
Weekend
Example: WEEKLY PROGRAMMING
Daily
Weekly
Weekend
Example: WEEKEND PROGRAMMING (MONDAY-FRIDAY OR SATURDAY- SUNDAY
Daily Monday- Friday
Weekly Saturday- Sunday
weekend
Monday Monday
Tuesday OPEN
Wednesday 09.30
Thursday 00.00
Friday 00.00
Monday - Friday
OPEN
10.00
14.00
00.00
P3 menu button to
P5 button (when it becomes
P3 menu button to save and
CLOSE
11.15 √
00.00
00.00
Monday- Sunday
OPEN CLOSE
09.30 11.15 √
00.00 00.00
00.00 00.00
CLOSE
12.15 √
16.00 √
00.00
OFF
Daily
Weekly
Weekend
15