JPT YDFLP-60-M7-L1-R User Manual page 22

[OVERHIGH SIMMER]
[OVERLOW SIMMER]
Default Frequency: In internal frequency mode, if there is no external frequency signal, the
Default width: If the external system cannot control pulse width, the system is in the default
External Frequency: when checking for external frequency model (the final output of the laser
and external frequency signal are synchronous, if the control card is optimized for external
frequency signal, you can choose this mode). When not check the external mode the laser work
as internal frequency (the system will calculate the external frequency signal firstly, and then
their parameters of pulse signal, if the control card without external frequency signal can use the
model to define the default frequency of laser)
Default External Frequency Mode
External Frequency
File Number: EFLP001-B
system run in the default frequency.
output pulse width.
Shenzhen JPT Opto -Electronics Co. Ltd.
20
YDFLP-60-M7-L1-R user manual
Version :B Date:2018. 4