How To Use The Built-In Timer - Yamaha GX-50 Owner's Manual

HOW TO USE THE BUILT-IN TIMER

MINI COMPONENT SYSTEM
GX–50
1
2
3
LOCATION
MUSIC
CD
TUNER
BAND
USER MEMORY
TAPE 1/2
REC/PAUSE
MODE
DOLBY NR
POWER
PHONES
TIMER REC
AUTO/MAN'L
TIMER
HOUR
1
PLAYBACK
EJECT
2-
CD
1 2
1 2
6 7
6 7
A B
TIME PROG TAPE
MODE REPEAT RANDOM
DISC SKIP
PLAY
LOCATION
MUSIC
USER FLAT
POWER
SLEEP
VOLUME
DISC CHANGE
OPEN/CLOSE
VOLUME
DOWN UP
AUX
NORMAL
HIGH
DUBBING
MEMORY
Active Servo
Technology
TIME ADJ
MIN
2
REC/PLAYBACK
EJECT
2- 2
3 4 5
3 4 5
8 PRESET
8 9 0
C D E
+
EDIT I0
TUNER
OPEN/CLOSE
2-
STOP PLAY/PAUSE
STOP PLAY
TAPE
REC/PAUSE DECK 1/2
INPUT
2-
Timer play
By using the built-in timer, you can set the time when the unit
turns on and a source begins playing automatically, and the
time when the unit turns off automatically.
1
Prepare the source to be played.
For tuner:
Tune in to the station you will listen to.
For tape deck:
Load a tape into the cassette compartment.
(If tapes are loaded in both the compartments, tape 1
takes priority of tape 2, and is played back by the timer
play.)
For CD player:
Load a disc on the disc table. If more than one disc are
loaded on the disc table, select the disc by using the
DISC selector buttons or the DISC SKIP button.
2
Press the DISPLAY button.
Whenever the DISPLAY button is pressed, the display
mode changes as follows.
At each mode, make a setting for the timer play, referring
to the setting procedure described below.
Current time (TIMER on/off mode)
Source selecting mode (TAPE, TUNER, CD)
ON TIME/Time setting mode
OFF TIME/Time setting mode
Normal display mode
* The display mode will be changed to the next mode
after about 8 seconds elapse automatically. If the mode
is changed before the setting is completed, call the
mode again by pressing the DISPLAY button once or
more.
Setting procedure:
At the display of current time
Check to be sure that the current time is correct, and
press the TIMER button so that "TIMER" lights up on
the display.
At source selecting mode
Select the source (TAPE, TUNER or CD) to be played
by pressing the corresponding input selector button.
* If "TUNER" is selected, soon it is changed to the
frequency display mode. In this mode, you can
select the station to listen to with the timer play by
using the BAND button, A/B/C/D/E button and
/ buttons.
E-41