Tuning Operation - Yamaha GX-50 Owner's Manual

TUNING OPERATION

5,
MINI COMPONENT SYSTEM
GX–50
1
2
3
LOCATION
MUSIC
CD
TUNER
BAND
USER MEMORY
TAPE 1/2
REC/PAUSE
MODE
DOLBY NR
POWER
PHONES
TIMER REC
AUTO/MAN'L
TIMER
HOUR
1
PLAYBACK
EJECT
4, 2 2 3
CD
1 2
1 2
6 7
6 7
A B
TIME PROG TAPE
MODE REPEAT RANDOM
DISC SKIP
PLAY
LOCATION
MUSIC
USER FLAT
POWER
SLEEP
VOLUME
"AM" is for U.S.A., Canada, Australia, Singapore and
General models.
"MW/LW" is for U.K. and Europe models.
3 3
DISC CHANGE
OPEN/CLOSE
VOLUME
DOWN UP
AUX
NORMAL
HIGH
DUBBING
MEMORY
Active Servo
Technology
TIME ADJ
MIN
2
REC/PLAYBACK
EJECT
1, 2
3 4 5
3 4 5
8 PRESET
8 9 0
C D E
+
EDIT I0
OPEN/CLOSE TUNER
1
STOP PLAY/PAUSE
STOP PLAY
TAPE
REC/PAUSE DECK 1/2
INPUT
Normally, if station signals are strong and there is no
interference, quick automatic-search tuning (Automatic
tuning) is possible. However, if signals of the station you
want to select are weak, you must tune to it manually
(Manual tuning).
Automatic tuning
1
Press the TUNER input selector button.
2
Select the reception band [FM or AM (MW or LW)] by
pressing the BAND button confirming it on the display.
3
If "PRESET" is illuminated on the display, press the
PRESET/TUNING selector button to turn it off.
4
Press the AUTO/MAN'L button so that "AUTO" appears
on the display.
(In this mode, stations are received in stereo or monaural
automatically.)
5
Press the button to tune to a higher frequency, or
press the button to tune to a lower frequency.
(When tuned in to a station, "TUNED" will light up on the
display.)
6
If the station where tuning search stopped is not the
desired one, follow step 5 again.
* If the tuning search does not stop at the desired station,
change to the Manual tuning method as described below.
* STEREO indicator will light up when an FM stereo
broadcast with sufficient signal strength is received.
Manual tuning
1 1
Follow steps 1, 2 and 3 of the Automatic tuning method.
2 2
Press the AUTO/MAN'L button so that "AUTO"
disappears from the display.
(In this mode, stations are received in monaural.)
3 3
Press and hold the
frequency, or press and hold the
lower frequency.
Release it just before reaching the desired frequency,
and then press it repeatedly until the desired frequency
appears.
(When tuned in to a station, "TUNED" will light up on the
display.)
Note
If you tune in to an FM station manually, it is received in
monaural automatically to increase the signal quality.
Direct operation
When the power is off (in the standby mode), pressing the
TUNER input selector button will turn the power on and
select the tuner source automatically.
E-17
button to tune to a higher
button to tune to a