Table of Contents
Advertisement
Section 3 - Configuration
Select PPPoE if your ISP requires you to enter a PPPoE username and password to connect to the Internet. Click Save at any
time to save the changes you have made on this page.
PPPoE Session
Create a new PPPoE session.
Username
Enter the username provided by your ISP.
Password
Enter the password provided by your ISP.
Address Mode
Select either Dynamic IP or Static IP.
IP Address
Configurable if Static IP is chosen. Enter the IP address
provided by your ISP.
Service Name
Enter the ISP service name (optional).
Reconnect Mode
Select either Always On or Manual.
MTU
Maximum Transmission Unit - you may need to change the
MTU for optimal performance with your ISP. The default is
1492 bytes.
D-Link G416 User Manual
IPv6 - PPPoE
43
Advertisement
Table of Contents
